HOME | CONTACTUS | ADMIN
 
 
 
HOME > products > detail view
 
TURNING ROLLER
naming TURNING ROLLER

This equipment, an equipment to link large bore pipes or tanks vessel etc by welding, is a device

 

that welds joint areas while rotating drive roller at constant speed after fixing 2 drive rollers and 2 idle

 

rollers to proper location, fitting them to the diameters of pipe and vessel to link by welding.

Untitled Document
 
CAPA 10TON 30TON 50TON 100TON 200TON 300TON 600TON 1000TON 1600TON
TURNING CAPACITY 10TON 30TON 50TON 100TON 200TON 300TON 600TON 1000TON 1600TON
LOAD DRIVE 5TON 15TON 25TON 50TON 100TON 150TON 300TON 500TON 800TON
IDLE 5TON 15TON 25TON 50TON 100TON 150TON 300TON 500TON 800TON
LOAD DIA. ø500~
ø2500 		ø700~
ø3000		 ø700~
ø5000		 ø1000~
ø6500		 ø1200~
ø7500		 ø1000~
ø6500		 ø1500~
ø8000		 ø4500~
ø10000		 ø4500~
ø10000
ROLLER SIZE DIA ø270 ø350 ø380 ø480 ø530 ø650 ø750 ø1200 ø1200
WIDE 130 180 200 260 260 260 300 300 500
TURNING SPEED(mm/min) 100~1000 100~1000 100~1000 100~1000 100~1000 100~1000 120~1200 100~1000 120~1200
DRIVE MOTOR(Kw) 0.75kw 2.2kw 3.7kw 5.5kw 7.5kw 11kw 15kw 22kw 30kw
POWER SOURCE A/C440V / 380V / 220V X 60Hz X 3ø
 
 
  Head Office & Factory : 40, Saenggoksandan 1-ro, Gangseo-gu, Busan, Korea / TEL : 82-51-831-8611 / FAX : 82-51-831-8711
copyright (c) 1998 HYUNDAI HYDRAULIC CO.,LTD. all rights reserved.